A1200 Series

The OpenVox A1200 Series analog cards are full-length analog cards. They can be used to connect analog telephones and analog POTS lines via a PC. They support combinations of FXS and/or FXO modules for a total of 12 lines.

The A1200 Series is the first industrial 12-port analog card with a design featuring 12 interchangeable FXS/FXO modules. It can eliminate the need for separate channel banks or access gateways.

The A1200 Series contains 12 module banks. Each bank supports one analog interface. The module banks can be populated with up to 12 FXO or FXS modules, allowing any port combination to be created. Expanding an analog card solution is accomplished simply by adding additional cards.

The A1200 Series works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects, as well as other open-source and proprietary PBX, Switch, IVR and VoIP gateway applications.

Target applications

Channel bank replacement / alternative

Home office (SOHO) applications

Small and medium-sized business (SMB) applications

Gateway termination to analog telephones/lines

Operating systems

Linux (all versions, releases and distributions from 1.0 onward)

Minimum hardware requirements

Pentium III 800 MHz

128 MB RAM

Available PCI slot

Certifications

RoHS compliant

Certifications: FCC, CE and LVD

Technical specifications

Up to 12 ports via a combination of FXS and FXO modules

Full-length analog card

RJ45 connector

32-bit 33 MHz PCI and fully compliant with PCI 2.2

32-bit bus-master DMA data transfers through the PCI interface at 132 MB/s

Autosense compatibility with 5 V and 3.3 V PCI buses

Firmware accelerates I/O access for high stability

Power: 7 W minimum, 37 W maximum at 3,3 V or 5 V.

Operating temperature: 0 °C to 50 °C

Storage temperature: -40 °C to 125 °C

Dimensions: 312 mm × 106,7 mm × 16 mm

Weight: 161 g