OpenVox IX160(P) Series IPPBX

OpenVox IX160/160P is a high-performance 19” 1U PBX solution. Designed and rigorously tested for optimal performance, this device allows users to integrate up to 2 OpenVox PCI‑E telephony interface cards, with any combination of FXS/FXO, BRI, and E1/T1/J1 interfaces.

The IX160/160P adds support for i3 and i5 motherboards to deliver more powerful performance and can handle up to 600 simultaneous calls and thousands of user extensions. In addition, the IX160/160P can integrate a variety of high-definition audio/video codecs, providing users with a high-fidelity audio/video calling experience.

The IX160/160P supports full protocol conversion, including SIP, IAX2 protocols on the IP side and BRI, PRI, SS7, R2 on the CPE side. Leveraging the open-source platform, the IX160/160P will be preloaded with OpenVox UC, Issabel, FreePBX, VitalPBX, PBX in a Flash, and Elastix® IPPBX systems. The preinstalled OpenVox UC system makes deploying, configuring, and using a PBX system even easier. Getting started is a breeze with a user-friendly GUI. Powerful IX devices enable businesses to grow while minimizing communication costs.

OpenVox IX160/160P is a risk-free solution with integrated redundant power supply (RPS) and uninterruptible power supply (UPS) that protect your system and data from damage or loss caused by an unexpected power outage. Optional RAID 1 support provides better data protection for your system. When RAID1 is installed, users can view the status of storage devices and receive alerts when a hard disk drive (HDD/SSD) fails, then simply replace the spare hard drive as soon as possible.

*Maximum number of calls tested under laboratory conditions

Technical specifications

Protocol: SIP (RFC3261), IAX2

Transmission protocol: UDP, TCP, TLS, SRTP

Codec: G711 (alaw/ulaw), G722, G723.1 G726, G729, GSM, ADPCM, iLBC, H263, H263P, H264

DTMF: In-band, RFC2833, SIP INFO

IP services: Static IP, DHCP, VPN, firewall, PPPoE, bridging

Firewall: Yes

T.38 Fax: Yes

UPS: Yes (Optional)

RAID: Yes (Optional)

Redundant power supply: Yes (Optional)

Typical applications

Optional preloaded open source IPPBX system

FXS/FXO, BRI, E1/T1/J1 Interface Combination

PRI/SS7/R2 to SIP gateway

PRI/SS7/R2/FXS/FXO/BRI signaling converter

PRI/SS7/R2 TDMoE gateway

Flexible application selection (IPPBX or firewall)

Zero-touch provisioning

User control panel

Combination options

A400E/A(E)810E/A(E)1610E/A(E)2410E

B(E)200E/B(E)400E

D(E)130E/D(E)230E/D(E)430E/D(E)830E/D(E)1630E

Except for A400E, all compatible cards can be used with the EC module.

IX160/160P supports a combination of two cards, for example:

A(E)1610E + B(E)400E

D(E)430E + B(E)400E

D(E)430E+A(E)2410E

D(E)430E + A(E)1610E

A(E)810E + A(E)810E

Software & Platform:

OpenVox UC system, Issabel, FreePBX, VitalPBX, Elastix, BrikerPBX

Note: The OpenVox UC system has not yet been adapted for telephony cards. If you need to install telephony cards, please use another system such as FreePBX/Issabel.