A1200 Series
Full-length analog card; supports combinations of FXS and/or FXO modules for a total of 12 lines. The first industrial 12-port analog card with a design featuring 12 interchangeable FXS/FXO modules;
Products
Every OpenVox product line, from PBX systems to gateways and accessories.
View all 184 productsIPPBX and phones
Cards and accessories
Connect my sites
Modernize what I have
Telephony Cards
1 T1/E1/J1 port; supports PRI, SS7, R2 protocols; up to 30 simultaneous voice calls;
OpenVox D110P is the world's most affordable single-port T1/E1/J1 card, offering excellent voice quality on telephony systems. It supports up to 30 voice calls or 2,048 Mbps full‑duplex data throughput over four T1, E1, or J1 lines.
The D110P supports E1, T1, and J1 environments. It can be selected by card or by port. This feature enables signaling translation between E1 and T1 equipment and allows low-cost T1 channel banks to connect to E1 circuits.
The D110P supports industry-standard telephony and data protocols, including Primary Rate ISDN protocol families (N. American and Standard Euro) for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Line-side and trunk-side interfaces are supported.
The D110P works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects, as well as other open-source and proprietary PBX, Switch, IVR, and VoIP gateway applications.
Target applications
Voice‑over Internet Protocol (VoIP) services
Complex IVR trees
“Meet‑Me” Bridge Conferences
Calling card platforms
VoIP gateways (supporting SIP, H.323, and IAX)
Legacy PBX/IVR services
Voice/data router (replaces expensive routers)
PRI/Switch compatibility – Network or CPE
Technical specifications
Single-port T1/E1/J1 with PCI interface for high-performance voice and data applications
Half-length PRI card
RJ48 connector
32‑bit 33 MHz PCI and fully PCI 2.3 compliant
32‑bit bus-master DMA data transfers across the PCI interface at 132 Mbytes/s
Autosense compatibility with 5 V and 3.3 V PCI buses
Power: 1.2 W maximum at 3.3 V or 5 V.
Operating temperature: 0 °C to 50 °C
Storage temperature: –65 °C to 125 °C
Dimensions: 12.3 cm × 6.5 cm × 1.8 cm
Weight: 54 g
PRI Switch compatibility
EuroISDN (PRI or PRA) – Q.931/Q.921
Network or CPE
AT&T 4ESS
National ISDN 2
CAS voice modes
DMS 100
Lucent 5E
Operating systems
Linux (all versions, releases, and distributions since 1.0)
Minimum hardware configuration
Pentium III 800 MHz
128 MB RAM
Available PCI slot
Certifications
RoHS compliant
Certifications: FCC, CE and LVD
See the manufacturer description and linked documentation for product information. No specification table is published on the captured product webpage.
Request a quote: our team will confirm availability, compatibility and a deployment plan.